Solar Power Installation Process: Comprehensive and Detailed

quy trinh lap dat dien nang luong mat troi min

The process of installing solar power is not too complicated, but it needs to be done correctly and ensure the necessary safety during the installation process. Therefore, it is necessary to learn about the solar power installation process to do it correctly and ensure maximum efficiency.

What is solar power?

Solar power is an abundant source of renewable energy, a green energy source that is increasingly accepted and widely used around the world. Solar power is electricity generated through solar panels. This is considered a clean source of electricity and does not cause emissions, contributing to reducing environmental pollution. Therefore, solar power is considered a safer and more sustainable energy source than traditional energy sources such as oil and coal.

The process of setting up the power source is 1 min

Thanks to the application of many advanced technologies, the solar power installation process is increasingly simple and convenient. Besides, the cost of installing solar power is now significantly reduced compared to before. Therefore, solar power is increasingly widely applied in businesses, industrial factories and households. 

Why is it necessary to install solar power?

Installing solar power brings many benefits. Besides contributing to environmental protection, solar power also helps your family or business save on electricity costs and reduce dependence on the national grid system.

The process of setting up the power source takes about 2 minutes

Some reasons to install solar power:

  • Save monthly electricity bills: Installing solar power will help you reduce electricity usage from the national power grid. Electricity will be obtained from solar panels. Therefore, you will significantly reduce your electricity costs each month.
  • The solar power installation process is simple and easy to use: Currently, the solar power installation process is quite convenient and easy to use. You will receive dedicated advice and installation support from the supplier.
  • Don’t worry every time there is a power outage: In the event of an emergency or power outage, electricity from solar panels will supply the devices in your home or business.
  • Environmental protection: Solar power is an abundant source of renewable energy, does not generate emissions like coal or oil, so it contributes greatly to environmental protection.
  • High durability: Solar panels have an extremely long lifespan (several decades) if maintained periodically.
  • Reduce dependence on the national grid system: You will use free electricity from your solar panels, no longer dependent on the national grid system like when using traditional electricity.

What to prepare before installing solar power?

Before installing solar power, you need to consider and prepare a number of factors so that the installation process goes smoothly. Here are a few things to keep in mind before installing solar power.

Cost calculation

Calculating costs is necessary before installing a solar power system. Besides the cost of the system, there are also some costs incurred during the installation process. In addition, in some cases you will also receive subsidies from the state when installing solar power, you need to learn and consider to optimize costs.

Determine the size of the solar power system

Determining the appropriate solar power system size is an important step before installing solar power. You need to calculate and add up the capacity of all the devices used in your home or business, and calculate the usage time of those devices.

After calculating, you will know the size, capacity of the solar battery and the wires to use. From there, you can choose the appropriate solar power system, bringing maximum productivity when used.

Check equipment

Before installing solar power, you need to make a list to check the required equipment to see if it is complete or not. Some required equipment such as solar panels, controllers, energy inverters, batteries, etc.

Solar power installation process

The solar power installation process is quite simple. Solar panels will usually be installed on the roof to maximize sunlight efficiency. 

The following are common steps in the solar power installation process.

Step 1: Set up the solar panel mount

The price is due to the minimal effect

The first step in the solar power installation process is to design a base frame or support for the solar panels. Installing brackets for solar panels is an important step, contributing to supporting the performance of solar cells.

Typically, these racks are placed on their side, the tilt angle can be from 18 degrees to 36 degrees. At the same time, learning about the geographical location of the installation site is also necessary to install solar batteries to receive as much sunlight as possible.

Step 2: Install solar panels

Set up with a minimal battery

Once the bracket has been set up, the solar panels will be installed securely and securely. This step requires meticulousness and care. The technician will tighten the nuts and bolts so that the solar panels are sturdy and ensure stability during operation.

Step 3: Install the wiring

Set up the minimum effective digital reception system

Installing the electrical wiring is also an equally important step. Typically, the MC4 connector will be used as it is suitable for the vast majority of solar cell types.

A small note when installing the electrical wiring system is to make sure to disconnect the power source during installation.

Step 4: Install the solar inverter

Set up the minimum signal dimmer

The solar inverter will be installed after completing the wiring. 

Energy inverters can be placed indoors or outdoors, energy inverters are highly efficient when placed in a cool place. If placed indoors, the inverter is usually placed in the garage, but if placed outdoors, it should be placed in a place away from afternoon sunlight.

Step 5: Connect the solar inverter and solar battery

ket noi bien tan min

Then, the solar battery will be connected to the solar inverter. Solar batteries help store backup power, helping families or businesses make the most of solar power.

Step 6: Connect the solar inverter and the power grid

Connecting the solar inverter to the grid is done by connecting one plug to the main power switch panel, the other end of the wire is attached to the electrical panel that supplies power to your home or business infrastructure. Friend.

In addition, you can also connect the inverter to a number of devices to monitor the amount of electricity produced by the solar power system such as a generator meter or computer to monitor the power supply over a specific period of time. .

Step 7: General acceptance

The final step is to start the solar power system and check the overall performance of the system. The main parameters will usually be displayed on the control panel or technical screen of the energy inverter. 

Conclude

Above is the entire solar power installation process. You need to carefully consult and choose a reputable solar power installation unit to ensure the safety of your family as well as the installation process. more advantageous.